Post
Replies:
8
OK my #Meshcore friends, what am I doing wrong?
Board is on the 3rd floor (over 6m above ground height.
Powered on, connected via Bluetooth, by a window.
Set to UK long range.
Been up for about 30 minutes and hasn't discovered any neighbours.
I know there are a couple of repeaters near-ish.
Just a case of wait and hope? Stick it in the loft? Increase power?
Any help and speculation welcomed 😄
4 media
Aha! I had to unbend the antenna 😁
Now receiving #Meshcore messages. Don't know if any of mine are being seen though.
2 media
Well the #Meshcore is *sort of* working.
With it's new placement I can just about hear one repeater.
I'm receiving some messages, but I guess my antenna is to puny to send any.
My noise floor looks good (I think) and I've discovered a few nodes.
I think I need more power and/or a bigger antenna.
If you're on the mesh, feel free to send me a message and I'll let you know if it arrives (details above).
4 media
Discovered more #meshcore nodes overnight, but still only infrequently receiving messages. Will try moving the tiny antenna to the loft - although that will reduce my Bluetooth connection to it.
2 media
Stuck the #meshcore in my loft. Hasn't meaningfully changed the signal strength.
Might try some different equipment or switching to #meshtastic.
2 media
On the advice of several people, I stuck the antenna at the highest part of my loft, pointing down so it wasn't in contact with the roof.
Signal strength improved - but still poor.
Still can't actually send messages to the nearest #Meshcore repeater.
2 media
@Edent Have you already tried it with the antenna standing or hanging upright?
@herrgruen yes. See previous post.
