Post
OK my #Meshcore friends, what am I doing wrong?
Board is on the 3rd floor (over 6m above ground height.
Powered on, connected via Bluetooth, by a window.
Set to UK long range.
Been up for about 30 minutes and hasn't discovered any neighbours.
I know there are a couple of repeaters near-ish.
Just a case of wait and hope? Stick it in the loft? Increase power?
Any help and speculation welcomed 😄
Aha! I had to unbend the antenna 😁
Now receiving #Meshcore messages. Don't know if any of mine are being seen though.
Well the #Meshcore is *sort of* working.
With it's new placement I can just about hear one repeater.
I'm receiving some messages, but I guess my antenna is to puny to send any.
My noise floor looks good (I think) and I've discovered a few nodes.
I think I need more power and/or a bigger antenna.
If you're on the mesh, feel free to send me a message and I'll let you know if it arrives (details above).
Discovered more #meshcore nodes overnight, but still only infrequently receiving messages. Will try moving the tiny antenna to the loft - although that will reduce my Bluetooth connection to it.
Stuck the #meshcore in my loft. Hasn't meaningfully changed the signal strength.
Might try some different equipment or switching to #meshtastic.
@Edent better antenna could help. I’ve definitely seen a big difference between antennas. Also have you tried the medium range or narrow settings? I think narrow has really taken over as the preferred setting in a lot of places. https://analyzer.letsmesh.net/map?lat=52.82493&long=-1.27596&zoom=5
@alec Thanks. I'm on Narrow - as recommended by others.
Looks like I need a better antenna!
@Edent I have recs for the 915 band, alas I don’t know 868. Something else to mind is the narrow setting has a pretty sharp falloff. It really needs infrastructure relatively nearby to work reliably. If you can figure out the closest repeater you might be able to orient the antenna toward it. Also outside is much more effective, but of course challenging.