Download this free 3D print file designed by Krumplefootskin. This is a remix of @BakedBean3D “Compact Dual-Chamber Whistle V2”. I saw a request from some whistle-blowers that they needed a whistle that was accessible if their hands were occupied. I think different clothing options might benefit for a different orientation, so I provided a model of the clip in both directions. Please print both to figure out what works best for you.The original was designed to be loud and print fast. The clips add a bit of time, but it's still an efficient print.The Bambu Studio print profile included has these custom features:* Quality: Bridge Flow 1.01 (provides better bridging over the sound chamber)* Quality: Thick Bridges (adds another bridging layer)* Strength: Wall Loops 3* Sparse infill density: 30%* Bridge Direction: 90 (this is key, please check your slicer and make sure the first bridge layer is perpendicular to the sound chamber as shown in the photo above – you might have to adjust this depending on orientation/slicer)This is my first remix. These print fast for me and are very loud. If you have questions or problems, I'll do my best. But, I'm just a newbie.Stay safe everyone!