Messing around with making inductors for a 2m band pass filter and measuring them with the NanoVNA. I made an OK-ish fixture with some RG-316, SMA connector, and alligator clips, and calibrated it with the fixture attached. Getting pretty close to the 100nH I need for these! #HamRadio #AmateurRadio
Discussion
Loading...
Apparently I should be aiming for higher Q than this. Will use a larger form and bare wire.
Going to attempt again this weekend. It seems that 14 AWG wire at roughly 2 turns on a 1cm core, space by ~1mm will be close. Should have higher Q.
bonfire.cafe
A space for Bonfire maintainers and contributors to communicate
Automatic federation enabled