Hi @jpm. Do you have any suggestions for a reasonably priced voltage logger? I am getting my sons old Sony, which has an intermittent fault which forces causes the Android TV OS to restart. While there could be any number of causes, I will first check voltages and test any capacitors I can easily get at. If I find nothing obvious it would be useful to monitor voltages over time to see if there are any changes pointing to something else!
@jpm thanks. I guess the last time I use a cro was in the early 1990s! The difference between the analogue cros I used and a dso is that the trace is stored digitally allowing for export or replay. Is that correct? Jees the aliexpress prices are insane! The cheapest on jaycar seems very limited in comparison while be significantly more expensive.
@jon yeah a modern DSO is quite different to a CRO. Rigol own the low-end, mostly because it’s easy to “upgrade” the protocol decoding licenses on them…
@jon and yes, the way modern DSOs work is that they run a high-speed ADC, varying the time base by running the ADC faster or slower usually up to a limit of 1Gsamples/second in low-end scopes. Every sample gets stuffed into a memory buffer, waiting for the trigger to occur. When the trigger occurs, the DSO lets the buffer fill up with samples, and can optionally keep some number of samples in the buffer from before the trigger occurred (which a CRO can’t do). When the buffer is full, the resulting waveform is displayed, BUT, during that display blanking period the DSO is effectively blind and can’t re-trigger while a CRO doesn’t have that issue and can continuously re-trigger part-way through a trace.
@jon this is very much in the “it depends” territory. The main problem is going to be resolution - if it takes a long time to trigger a voltage dip, you have to reduce resolution to stream samples indefinitely, but if your resolution is too low then you won’t actually see any voltage drop. If you can find something that can work as a trigger when the smart garbage reboots, you could use pretty much any digital storage oscilloscope that provides a pre-trigger buffer.