Prototype 8x8x8 LED cube assembly complete!
Now I just need the acrylic case, but the parts are too big for my little laser cutter. HammerSpace (local maker space) to the rescue!
Discussion
Loading...
Discussion
I can't stop playing with these 6x6x6 LED Cubes! (this is also how I test the PCBs & LEDs) 😁
Powered by #PixelBlaze by @wizard
Working on a prototype 6x6x6(x6?) RGB LED HyperCube! This thing is a fingerprint magnet, and is very hard to photograph and capture on video. 😅
How many LEDs are in this cube again?!
Another, slightly less close-up photo of the 6x6x6 RGB LED cube, described in the first image.
Another, slightly less close-up photo of the 6x6x6 RGB LED cube, described in the first image.
Another close-up photo of the 6x6x6 RGB LED cube, described in the previous image.
Close-up photo of the 6x6x6 RGB LED cube inside a translucent mirrored acrylic enclosure. The mirrored sides reflect the appearance of an endless expanse of LEDs.
Preparing for and eagerly awaiting the imminent arrival of fresh new prototype PCBs. 😁
Screenshot of a PCB order details, showing "LED-Cube-8x-Sticks" and "LED-Cube-8x-Base" with completed production process and status of "Shipped".
Photo of a hand holding a white 3D printed jig with 64 square holes in it, in an 8 x 8 grid, on a white background. To the left of the 8x8 grid there's a matching 6x6 grid, a black PCB with matching holes in a 6x6 grid, and a LED strip with 6 LEDs.
The solder party can finally begin!
Photo of a panel of LED stick PCBs. Each stick has eight LEDs, and there are 13 sticks on the panel. The panel has edge rails on each side.
Photo of two black LED stick PCBs on a white background. The stick on the left has six square white LEDs, the right as eight. Both have the same distance between each LED, so the right one is longer.
Photo of a black PCB on a white background. The PCB has 64 sets of 2x2 pin header holes in an 8x8 grid.
Prototype 8x8x8 LED cube assembly complete!
Now I just need the acrylic case, but the parts are too big for my little laser cutter. HammerSpace (local maker space) to the rescue!
Playing with the 8x8x8 LED Cube, creating new patterns using the built-in #Pixelblaze by @wizard.
Get your own cube: https://lectronz.com/products/led-cube-8x8x8
bonfire.cafe
A space for Bonfire maintainers and contributors to communicate
Automatic federation enabled