Weekend project: "Raspberry Pi Pico Weather Station" by @stfn

Right now, I only have a BME280 sensor and a Pico 2 W, solar power will have to wait. Sensor readings look good!

#micropython #pico2 #bme280

https://stfn.pl/blog/02-pico-weather-station/

Weekend project: "Raspberry Pi Pico Weather Station" by @stfn

Right now, I only have a BME280 sensor and a Pico 2 W, solar power will have to wait. Sensor readings look good!

#micropython #pico2 #bme280

https://stfn.pl/blog/02-pico-weather-station/

Raspberry Pi Pico 2 W with MicroPython on OpenSUSE Leap 16.0.

The terminal emulator minicom is not available on Leap, but picocom is:

$ sudo zypper install picocom
$ sudo usermod -aG dialout $USER

Log out, and back in.

$ picocom --quiet --baud 115200 /dev/ttyACM0

Type Ctrl-a Ctrl-x to exit.

Thonny IDE can be installed as a flatpak from flathub.

The minicom terminal emulator can be used from a Tumbleweed distrobox, but then you need to setup udev rules, see link.

https://discussion.fedoraproject.org/t/silverblue-toolbox-dev-ttyusb0-has-permission-nobody-nobody/74364

#micropython #pico2 #opensuse_leap

Raspberry Pi Pico 2 W with MicroPython on OpenSUSE Leap 16.0.

The terminal emulator minicom is not available on Leap, but picocom is:

$ sudo zypper install picocom
$ sudo usermod -aG dialout $USER

Log out, and back in.

$ picocom --quiet --baud 115200 /dev/ttyACM0

Type Ctrl-a Ctrl-x to exit.

Thonny IDE can be installed as a flatpak from flathub.

The minicom terminal emulator can be used from a Tumbleweed distrobox, but then you need to setup udev rules, see link.

https://discussion.fedoraproject.org/t/silverblue-toolbox-dev-ttyusb0-has-permission-nobody-nobody/74364

#micropython #pico2 #opensuse_leap

New Open Source Hardware board in stock: RP2350-PICO2-BB48 exposes all 48 GPIOs in a breadboard friendly layout https://olimex.wordpress.com/2025/09/22/new-rp2350-pico2-open-source-hardware-development-board-with-all-48-gpios-exposed-in-breadboard-friendly-layout/ #raspberrypi #pico #pico2 #micropython #circuitpython

New Open Source Hardware board in stock: RP2350-PICO2-BB48 exposes all 48 GPIOs in a breadboard friendly layout https://olimex.wordpress.com/2025/09/22/new-rp2350-pico2-open-source-hardware-development-board-with-all-48-gpios-exposed-in-breadboard-friendly-layout/ #raspberrypi #pico #pico2 #micropython #circuitpython

RP2350pc is Open Source Hardware all in one computer with Dual Core ARM/RISCV processor, 8MB RAM, 16MB Flash, Audio Codec, Four USB hosts, DVI/HDMI video, LiPo UPS, Two UEXT connectors https://olimex.wordpress.com/2025/07/01/rp2350pc-open-source-hardware-all-in-one-computer-with-rp2350b-8mb-psram-16mb-flash-four-usb-host-dvi-hdmi-output-and-audio-codec-for-retro-computer-emulation-and-education/ #oshw #raspberrypi #pico2 #retrocomputer #retrogaming #apple2 #oric

RP2350pc is Open Source Hardware all in one computer with Dual Core ARM/RISCV processor, 8MB RAM, 16MB Flash, Audio Codec, Four USB hosts, DVI/HDMI video, LiPo UPS, Two UEXT connectors https://olimex.wordpress.com/2025/07/01/rp2350pc-open-source-hardware-all-in-one-computer-with-rp2350b-8mb-psram-16mb-flash-four-usb-host-dvi-hdmi-output-and-audio-codec-for-retro-computer-emulation-and-education/ #oshw #raspberrypi #pico2 #retrocomputer #retrogaming #apple2 #oric